工業技術研究院

技術簡介

本技術可適應不同冷媒之壓縮機性能測試，係結合水側熱量計測試系統以及冷媒全循環測試平台兩個次系統所構成，水側熱量計法測試系統乃習知用以測試冰水機的性能，冷媒全循環測試平台結合待測壓縮機即為1套擬真的冰水機系統。本技術藉由控制水側熱量計測試系統之冰水與冷卻水循環的流量與溫度，使壓縮機在冷媒全循環測試平台於設定的吸氣與排氣條件運轉，從水側熱量計測試系統的水流量、溫差量測計算壓縮機的製冷能力，以及量測壓縮機的消耗電功率，來獲得壓縮機的性能係數。

Abstract

This technology can be adapted to different refrigerants for the compressor performance measurement. It is composed of two sub-systems which are a water-side calorimeter system and a complete refrigerant cycle test platform. The water-side calorimeter system is commonly used to test chiller units. The compressor to be tested installed on the platform can form a complete refrigerant cycle to simulate a chiller system for performance testing of the compressor. This technology controls the flow rate and temperature of circulated chilled water and cooling water, allowing the compressor to operate under set suction and discharge conditions on the platform and measures the water flow rate and temperature difference from the water-side calorimeter system. Then calculating the refrigeration capacity of the compressor and the electrical power consumption of the compressor to obtain the coefficient of performance of the compressor.

技術規格

製冷能力範圍: 50~1,000 USRT 冰水可控制範圍: 5~20℃ 冷卻水可控制範圍: 18~60℃ 滿足CNS12575以及AHRI-551/591之測試標準

Technical Specification

Cooling capacity: 50~1,000 USRT Chilled-water control range: 5~20℃ Cooling-water control range: 18~60℃ Qualified for CNS12575 and AHRI-551/591 standards.

技術特色

協助冰水機及壓縮機製造商建構適應各種型式壓縮機與工作流體之性能測試系統，並可協助冰水機及壓縮機製造商確認所開發之產品是否滿足能源署所規定之能源效率分級規範。

應用範圍

冰水機及壓縮機製造商

接受技術者具備基礎建議（設備）

場域內至少擁有面積200平方米及高度超過3.5m的空間，且場域內可提供匹配所適應壓縮機、冰水機之電量。

接受技術者具備基礎建議（專業）

冰水機及壓縮機性能測試相關知識。

聯絡資訊